|
Model |
PC650 |
|
Compatible models |
PC650 |
|
External dimensions |
833*462*254 |
|
Weight |
190kg |
|
Color |
Komatsu Yellow |
High-strength structural design, excellent impact resistance
I-beam mechanical optimization: I-beam structural design is adopted to disperse stress through the principle of bionic mechanics, improve overall bending and torsion resistance, and is suitable for heavy-load excavation and crushing conditions.
Reduce deformation risk: In high-load operations (such as mining and rock excavation), the main beam can effectively resist deformation, extend the service life of the bucket, and reduce the risk of accidental breakage.
Upgrade of wear-resistant materials: Hardox 450/500 wear-resistant steel plates or domestic equivalent materials are used in key stress-bearing parts, with a hardness of more than HB450, and wear resistance is 3-5 times higher than that of ordinary steel.
Local reinforcement technology: Double-layer steel plates or welded wear-resistant strips are used in easily worn areas such as bucket tooth seats and side edges to reduce maintenance frequency and extend replacement cycles.
Multi-scenario coverage: Design a variety of capacity specifications (such as 0.8-5.0m³) for different materials such as earthwork, gravel, slag, etc., to adapt to the diverse operating needs from loose soil to hard rock.
Modular accessory interface: Reserved quick-change device interface, which can quickly be compatible with multi-functional accessories such as hydraulic rammers and breaker hammers to improve equipment utilization.
Replaceable design: Wear plates, cutting edges and other parts are fixed with bolts, and there is no need to replace the bucket as a whole, reducing the cost of a single repair by more than 40%.
Symmetrical welding process: The main beam and side plate are welded with X-shaped grooves to reduce stress concentration, reduce the probability of cracking in the later stage by 30%, and make maintenance more worry-free.
Precise adaptation to mainstream models: covering 20-50 ton excavators such as CAT 320, Komatsu PC200, Sany SY365, etc., providing customized hole matching services, installation error <1mm.
Return on investment calculation: Compared with traditional buckets, the service life is increased by more than 50%, and the average annual comprehensive cost (including maintenance and replacement) is saved by more than 15%.
Enhanced stability: The low center of gravity I-frame design, combined with the curved bucket wall, increases the full bucket rate while reducing material spillage, and shortens the single operation cycle time by 10%.
Safety certification: Passed ISO 9001 quality system and CE certification, 100% ultrasonic flaw detection of key welds to ensure safe operation under extreme working conditions.
Weight reduction design: Through topological optimization technology, the self-weight is reduced by 5-8% while ensuring strength, reducing equipment fuel consumption, and meeting the energy-saving requirements of Tier 4 emission models.
Application of recycled materials: Some models are made of 30% recycled steel, meeting the ESG standards of green construction companies.
Our company adheres to ISO 9001 quality certification, establishes an internal audit system, conducts regular quality inspections, and ensures that our products and services meet standards.
http://www.sdxwmachinery.com/